Skip to content
CycleBenchBY SMARTFACT

FREE TIME STUDY ON A PHONE

How to do a cycle time study

Updated

A cycle time study times one repeated job at one station over several consecutive cycles, each from the same start point to the same end point, and then takes the average. CycleBench does it free in your phone's browser: tap at each cycle boundary, record stops with a reason, and exclude an unusual cycle with a written reason while every raw time is kept.

Free to use. No account, email address or trial. Works offline once prepared.

CycleBench timing screen with the first cycle recorded and the second cycle running
Consecutive cycles timed on a phone, handheld or scan station.
How to do a cycle time study · 3:23 · Watch on YouTube

Where does each cycle start and end?

Choose one moment in the job that is easy to see, such as a part going into the fixture, and use it as the end of one cycle and the start of the next. Scan or type the station code and describe the activity, then tap Start cycle study as the first cycle begins. A scan only sets the station or activity: every boundary is a large tap, because pointing a camera and decoding a barcode take a variable amount of time.

CycleBench with station ASSY-03 scanned and the activity described
The station and activity are labels you declare; the clock has not started.

How many cycles should I time?

There is no fixed number. Time consecutive cycles until you have seen the usual pattern and any unusual ones: the more cycles you include, the less one unusual cycle moves the average. Tap Next cycle at each repeat; each tap ends one cycle and starts the next, so nothing falls between them. A study holds up to 1,000 observations.

How do I record waits and stops?

While a cycle is running, type or scan the reason and tap Start interruption, then End interruption when the work resumes. The interruption stays inside the cycle it interrupted, so a 12-second cycle with a 3-second wait is 12 seconds gross with 3 seconds of interruption, never 15 or 9. There is no pause button: Next cycle and Finish study wait until the interruption has ended.

CycleBench timing an interruption with the reason Waiting for materials while the cycle keeps running
The cycle keeps running while the interruption is timed inside it.

How do I leave out an unusual cycle?

In the review, exclude the cycle with a written reason, such as a tap made too soon or a dropped part. An exclusion without a reason is refused. The mean then covers only the included cycles, while the excluded cycle keeps its raw time and your reason in the list, the CSV and the PDF. Include it again with a new reason and the mean goes back.

CycleBench finished study with one cycle excluded and a mean of 10.667 seconds for the three included cycles
One cycle excluded with a reason: the mean covers the other three.

How is the average worked out?

The result is the mean of the included cycles: their gross times added together and divided by how many there are. Cycles of 10, 12, 9 and 11 seconds have a mean of 10.5 seconds. Each cycle keeps its interruptions inside its gross time, and an interval where timing was lost is shown as uncertain and never counted as a cycle. CycleBench reports the mean, with no performance rating or allowance applied.

CycleBench finished study with four cycles included and a mean cycle of 10.500 seconds
Four cycles of 10, 12, 9 and 11 seconds: a mean of 10.5 seconds.

What CycleBench does not do

It records what one observer sees on one device. It does not calculate takt time, find the bottleneck in a line or set standard times: the mean describes the cycles you observed. It does not monitor machines, read sensors or calculate OEE, and it does not rate or rank people.

WHO IT IS FOR

For supervisors, team leaders and process engineers who want to know how long a repeated job takes at a station, without copying stopwatch laps into a spreadsheet.

WHY USE IT

The mean covers only the cycles you include

A list of stopwatch laps loses the context: which station, which job, and why one cycle took longer. CycleBench records each cycle with its station, activity and any interruption reasons, and reports the mean of the cycles you choose to include. An excluded cycle keeps its raw duration and the reason you gave, so anyone reading the report can see what was left out and why.

HOW IT WORKS

CycleBench in three steps.

  1. 01

    Scan the station and activity

    Scan a station barcode and an activity code with the phone camera, or type them. They are labels you declare, not a live lookup of a machine or a job.

  2. 02

    Tap each cycle boundary

    Press Start cycle study as the first cycle begins, Next cycle at each repeat and Finish study after the last. The clock shows the elapsed time of the cycle in progress.

  3. 03

    Review the cycles

    Exclude an accidental tap or an unusual cycle with a written reason. The selected mean updates, and the CSV and PDF still show every cycle, included or not.

A CONCRETE EXAMPLE

Four cycles in the mean, one excluded with a reason

A supervisor times a bracket fitting job at station BENCH-04: 41.2, 38.9, 44.6 and 39.7 seconds. A fifth cycle of 2.1 seconds came from a tap made too soon, so it is excluded with the reason accidental boundary tap. The selected mean of the four included cycles is 41.1 seconds. The excluded cycle stays in the CSV and PDF with its raw duration and reason.

USED IN PRODUCTION

From a timed study to a better routine.

CycleBench shows where the time goes while you watch. Two SmartFACT services handle what repeats every day: making an improved method the one each unit follows, and getting materials to the line before anyone waits for them. Both are in early access, with scope agreed at onboarding. CycleBench does not send observations to either service.

Free tier

WorkSteps

When a study shows a better way to do the job, WorkSteps makes it the method each unit follows. Describe in plain English when each approved step applies. Approved rules select the steps from each unit's options, ask for the evidence you specify and keep a record of the completed work.

Free tier

RefillFlow

When the interruptions you record are waits for materials, RefillFlow turns an empty container at the line into one refill request. Stores gets a printed ticket and a board to work from, and the line records what arrived. Approved plain English rules set the stores queue, priority and escalation.

BEFORE YOU START

Common questions.

What is meant by cycle time?

Cycle time is how long one repeat of a job takes, measured from a fixed point in the job to the same point in the next repeat. A cycle time study measures it by timing several consecutive cycles and averaging them.

How do I calculate cycle time?

Time several consecutive cycles from the same start point to the same end point, add up the cycles you include and divide by how many there are. CycleBench does the sum for you and keeps any excluded cycle in the list with its reason.

Is cycle time the same as a bottleneck?

No. Cycle time is how long one station takes for one unit. The bottleneck is the step with the longest cycle time, which limits how fast the whole process runs. Timing each station shows where it is likely to be; CycleBench times one station and activity per study and does not compare stations for you.

Can I get the times into a spreadsheet?

Yes. Download observations CSV gives a row for each cycle and each interruption, with durations in milliseconds, whether the cycle is included, review notes and start and end timestamps. Text a spreadsheet could read as a formula is escaped. Import code columns as text to keep leading zeroes.

Does a scan start the timer?

No. A scan only sets the station, activity or interruption reason. Every timing boundary is a large tap, because pointing a camera and decoding a barcode take a variable amount of time.

Is the mean a standard time?

No. It describes the cycles you observed and included. CycleBench does not apply performance ratings or allowances, does not calculate a labour standard and does not compare or rank people.

What are the current limits?

CycleBench records what one observer sees, on one device, while the page stays open and in view. If the screen locks, the page is hidden or the clocks disagree, the unfinished interval is marked uncertain and nothing is measured until you resume with a new boundary. The tool does not keep the screen awake. It does not monitor machines, read sensors or video, calculate OEE, rate or rank people, set labour standards or feed payroll. One study runs at a time. A project holds up to 100 studies, 1,000 observations per study, 3,000 observations and 5,000 interruptions in total, and 100 interruptions per observation. Each observation lasts up to 24 hours, labels up to 128 characters and review notes up to 500. Station, activity and reason lists cannot be imported, and the tool does not print code sheets.

What happens to my data?

Your study stays in this browser. It starts as temporary work in the tab's memory; Save on this device keeps it between visits. Nothing you record is uploaded, and no account or contact details are needed. The camera opens only when you press its button in a scan field, and barcodes are decoded on the device. Google Analytics is optional and loads only after you accept; it never receives codes, reasons, timings or notes. Use Analytics settings to change your choice; see /privacy/.

FREE TO USE

Put CycleBench to work.

Open the free tool and start with one known example.

Start a free study →

THE SMARTFACT SUITE

SmartFACT services
and free tools.

Automate factory decisions with rules you describe in plain English. Explore focused SmartFACT services, plus free tools for everyday checks. The free tools need no account.

Free tierSuggested next step

WorkSteps

Turn plain English rules into automatic step selection for each unit, with required evidence and a record of completed work.

Explore WorkSteps ↗
Free tier

LabelRules

Describe label rules in plain English. Automatically select layouts, resolve customer codes and check each job before printing.

Explore LabelRules ↗
Free tier

KitProof

Turn plain English component rules into automatic kit checklists, then check scans against the expected parts and quantities.

Explore KitProof ↗
Free tier

FactorySpec

Apply approved product rules and calculations automatically to turn dimensions and options into manufacturing requirements.

Register early-access interest ↗
Free tier

SmartFACT Data

Maintain reference tables with ConfigSheets or bring shop orders into SmartFACT through reviewed connectors. Check changes and deliver data to the products that use it.

Explore SmartFACT Data ↗
Early access

ParcelOffice

Scan the work order and the parcel choice to book the courier and print the labels. Approved plain English rules recommend or choose the parcel.

Explore ParcelOffice ↗
Free tier

RefillFlow

Scan an empty container to send the right refill request to stores. Approved plain English rules set the stores queue, priority, ticket printer and escalation.

Explore RefillFlow ↗
Free tier

RemnantRack

Label each offcut, find a suitable length before cutting new stock and record what you used. Approved plain English rules decide what to keep and where it goes.

Explore RemnantRack ↗
Free tier

ToolCustody

Check a shared tool before handover, record who has it and keep damaged or overdue tools out of the next issue. Start free with one crib.

Explore ToolCustody ↗
Free tier

StoresFlow

Receive, put away, reserve and issue stores material with barcode checks, keeping held, reserved and available stock apart. Start free with one stockroom.

Explore StoresFlow ↗
Free tier

LotTrail

Follow a lot or serial number through the records your factory already keeps, with the source of each link and the gaps shown. Start free with two declared sources.

Explore LotTrail ↗
Early access

CheckStation

Scan an identified unit to get its approved final-inspection checks, then record exact readings with their result, holds and release history.

Register early-access interest ↗
Free tier

ReclaimStation

Book returned units in, recover and label the usable parts, release them independently and record the unit each goes into. Start free with one product family.

Explore ReclaimStation ↗
Free tier

SmartFACT Purchasing

Collect purchase requests, approve supplier orders and track what is still to arrive. Start free at one site.

Explore Purchasing ↗
Free tier

SmartFACT Automation

Describe, test, approve and audit the automation rules of every SmartFACT product in one place. Included with each product’s paid plan, or on its own.

Explore Automation ↗
Free tool

ScannerBench

See the text and key events your keyboard scanner sends. Compare them with the value you expected.

Test a scanner ↗
Free tool

PrintBench

Print a known PDF, measure its reference marks and compare scans from the printed codes.

Check a print ↗
Free tool

CardBench

Create 100 × 50 mm bin and rack cards with Code 128 or QR, from one record or a CSV.

Make bin cards ↗
Free tool

CountBench

Count stock by location with a barcode scanner, compare it with a stock file and export the results.

Start a free count ↗
Free tool

BarcodeBench

See exactly what a scanned barcode contains, with hidden characters shown and GS1 fields, check digits and dates explained.

Inspect a barcode ↗
Free tool

MatchBench

Scan a reference and each label, see an exact match or the first difference, and download the results.

Start a free comparison ↗
Free tool

TagBench

Scan an item or location, note what needs attention, print a review tag and keep a review list.

Make a free tag ↗
Free tool

FindBench

Load your own parts and locations CSV, scan a code and see every location it lists.

Start a free lookup ↗
Free tool

ManifestBench

Check cartons, pallets or serial numbers against a list with a phone or scanner and see what is missing.

Start a free check ↗
Free tool

FeedBench

Check CSV and JSON files exactly as written, preview a column mapping and compare two versions by key.

Check a file free ↗
Free tool

CycleBench

Time work cycles and changeovers on a phone, record interruptions with reasons and download the results.

You are here
Free tool

OffcutBench

Label the offcuts on your rack, find a piece long enough before cutting new stock and record what you used.

Track offcuts free ↗
Free tool

TraceBench

Load one or two CSV exports and follow a lot or serial forwards or backwards, with the row behind every link.

Start a free trace ↗
Free tool

ReclaimBench

Record the parts recovered from each return, label them with a QR code, check them and record the unit each one goes into.

Track recovered parts free ↗
Free tool

GuidBench

Generate GUIDs, UUID v4 and v7, ULIDs and Nano IDs, format and download batches, or inspect a UUID in your browser.

Generate identifiers ↗
Free tool

OctetBench

Inspect and edit text, hex, Base64 and binary bytes in your browser, reveal hidden characters and compare byte sequences.

Inspect some bytes ↗
Free tool

PatternBench

Test JavaScript regular expressions in your browser, inspect matches and captures, preview replacements and check expected cases.

Test a pattern ↗
Help

SmartFACT Help

Step-by-step guides and interactive demonstrations for the SmartFACT suite. Read the instructions, watch a task or practise with real product screens and sample data.

Open SmartFACT Help ↗